Hello,
We need to purchase 16, 000 PCS of tarpaulin as per attached specs.
Characteristics Specifications Yes/No
Material Plain Sheet Woven high-density polyethylene (HDPE) black fibbers fabric laminated on both sides with white low-density polyethylene (LDPE) coating.
Woven black HDPE fibers fabric and coated with grey LDPE on the outside.
6 bands of 75mm +/-3%. Pre-punched 8mm diameter holes on the 2 side bands at 0.1m +/-10 % intervals, positioned in the centre of the bands (only the reinforcement bands are pre-punched, not the tarpaulin itself).
Tear strength in plain sheet at state of origin Minimum 100N under ISO 4674-1B 2003, with a test piece of 200X200mm as described in ISO 4674 annex B, in plain sheet.
Tensile strength in plain sheet at state of origin Minimum 500N and 15% to 35% elongation in warp and weft in plain sheet under ISO 1421-1.
Tensile strength in the reinforcement bands at state of origin Minimum 700N inside the reinforcement bands as per ISO 1421-1, pulling lengthwise in a pre-punched hole of 8mm with a hook of 8mm wire diameter. Minimum 80% of the original value of the actual product, AND not less than 665N
Fire Retardancy Flame retardant EN13823+A2
Dimension Sheet Size 4X6m ± 1%
Weight, plain sheet only, excluding the bands weight 190G/M² ± 20g under ISO 3801 (equivalent to 170G/M² minimum to 210G/M² maximum).
Weight, complete sheet including bands weight Plain sheet specific weight plus 10% additional weight for the reinforcement bands under ISO 3801. Total weight from 187G/M² minimum and 231G/M² maximum.