A motor pump mounted on a two-wheeled chassis with a trailer device.
The technical capabilities of the motor pump should allow pumping heavily polluted water with silt and various solid particles.

Overall dimensions of the motor pump mounted on the chassis: 2350X1410X1880 mm - 2450X1510X1980 mm (LxWxH)
Tire size R13.
Engine: Diesel, liquid-cooled, with a maximum output of 27 HP.
Start the electric starter (battery included).
The maximum capacity of the pumping unit is 340 m3/hour.
Head: 27.5 m
. Suction height is not more than 7.5 m.
The diameter of the I/O pump part is 150 mm.
Weight is 790 kg, but not more than 820 kg.
The fuel tank capacity is 150 liters.
The check valve is integrated into the pumping part.
Wide temperature range of use from -25 to 50 ° C
The color of the trailed motor pump is in agreement with the customer.
Engine Characteristics:
Type diesel:
- with direct injection,
- engine capacity 1.861 cm3,
- the number of cylinders is not more than 3,
- electronic speed control,
- liquid cooling,
- electronic speed control,
- Environmental standard EC2002/88/CE Stage 3A.

The mechanical seal block is flushable and has a mechanical seal lubrication system.
The pumping part has easily opening hatches for inspection and maintenance.
Lubricated mechanical seal.
Rubber-coated expansion plate; Main advantages of the pump part: Cast iron construction;
An open impeller that allows pumping water with particles up to 76 mm in diameter.;
The check valve is integrated into the pump part;
Control panel features: Manual speed control, digital hour counter. Automatic engine shutdown in case of: Low oil pressure, engine overheating, lack of battery charge.



The set includes accessories:
- adapter flange-spherical head, for suction and pressure lines, made of galvanized steel, designed for suction and pressure lines, strong and hermetic connection - 2 PCS.,
- 90° angle nozzle is used to prevent bending of the pressure hose, it is installed on the pressure line - 1 PC.,
- filter mesh under the hose clamp for connecting the hose 1 PC.,
- gripping head - 2 PCS. Is used to connect the suction reinforced sleeve.
- reinforced suction hose with a diameter of 150 mm and a length of 4 m - 2 PCS
. - latex pressure hose with a diameter of 150 mm. Length of 20 m (bay) - 1 piece rubberized with connecting heads assembled.,
- two-bolt hose clamp 155 mm - 165 mm - 5 PCS.