DIESEL PUMPS FOR AGRICUTURE: 787 Sets

Diesel Engine Specifications: -
Brand Name: To be mentioned by the bidder
Model: To be mentioned by the bidder
Country of Origin: To be mentioned by the bidder
Country of Manufacturer: To be mentioned by the bidder
Engine type: Water cooled, Diesel driven, 4 Stroke, Horizontal, Single cylinder
Cooling system: Water (Radiator/Condenser type)
Engine power: Minimum 8 HP at Minimum 2200 rpm
Air filter: Fitted
Silencer: Fitted
Fuel tank capacity: Minimum 4.5 Liters
Starting system: Manual cranking
Speed control: Manual throttle

Engine Spare parts: -
Brand Name (if any): To be mentioned by the bidder
Country of Origin: To be mentioned by the bidder
Spare parts: Big end bearing (1), Piston (1), Liner (1), Ring (1), Fuel filter (2), Head gasket (2)


Pumps Specifications: -
Brand Name: To be mentioned by the bidder.
Model: To be mentioned by the bidder.
Country of Origin: To be mentioned by the bidder.
Country of Manufacturer: To be mentioned by the bidder
Pump type: Single stage, Single entry, Back pull out design, Bear shaft Centrifugal pump.
Suction & discharge port type: 100 mm (4 inch) with flange.
Suction & delivery hose clamping: Suction & delivery hose pipe clamped with 100mm dia MS nipple with one end flanged of 1 FT long pipe.
Flow rate: 1200-1275 lit/min, minimum 0.75 cusec.
Suction head: 8 m.
Pump speed: 1500 ± 100 rpm.
Sealing system: Gland pack with staffing box.
Net weight of the pump: 22 ± 2 Kg
Bearing & lubrication: Open type deep groove ball bearing immersed in lube chamber.
Mounting of the pump set: Mounted in a mild steel structured frame with provision of adjustment by nut bolt.

Pumps Spare Parts: -
Brand Name (if any): To be mentioned by the bidder
Country of Origin: To be mentioned by the bidder
Spare parts: Bearing 6305 No (2), Impeller (2), Impeller nut (2 sets), Impeller nut washer (2 sets), Belt (3), Coupling (1), Gland packing (10 lb)