ALP1 BT for Industry and Law-Enforcement is a portable Ethanol Specific Fuel-Cell Sensor Breathalyser which operates in Passive no-mouthpiece FAST mode for quick road side or entry point screening and Active Normal Mode using a mouthpiece to obtain a digital test result for use in disciplinary hearings, CCMA cases and labour procedures as evidence.

The last 500 breathalyser test results are stored in Memory captured after each test for downloading and analysis on a PC with free PC software.

ALP1 meets the EN Standard - EN 15964: 2011 for Breath alcohol test devices other than single use devices and has an SABS conformance report available for confirmation.

Enabled for both FAST passive no-mouthpiece testing and NORMAL active mouthpiece testing.

Memory of test results is password protected and includes date and time of each test.

Includes: Standard Protective Carry Case, Free PC Software, USB Cable & Batteries.

ALP-1 BT operates with our iSober APP & Cloud Service. ISober APP is available free on the Google Play Store. (Android only)

Includes a 12 month calibration certificate. Evidence suitable for use in disciplinary procedures and accepted in labour / CCMA cases.

Please note: All breathalysers and breath alcohol sensors require calibration at least once per annum and at more regular intervals depending on use to ensure that results remain accurate.

Spec Detail
Indication of B. A. C & BrAC 0.000 to 4.000% or 0.000 to 0.400%BAC or 0.00 to 2.50 Mg/l BrAC
Accuracy +/-0.005%BAC at 0.100%BAC
Mouth piece 5 mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit
Sensor Replaceable Electro-chemical Fuel Cell Sensor - Ethanol Specific
Power supply Two 1.5V AA Alkaline batteries for unit. Re-chargeable batteries can be used as well.
Weight 198g (Including batteries) breathalyser only & packed 500g
Dimensions (mm) 13cm (height) X 6cm (width) X 3cm breathalyser only & packed 20cm by 18cm by 5cm
Notes Auto power off
Includes Free PC Software & Cables.
Battery Low indication
Memory: Last 500 tests
Meets EN Standard - EN 15964: 2011
Air flow rate checking in case of low breath volume
Annual Calibration Reminder
Certified Water resistant to IP54 rating IEC 60529: 2001
PASS/FAIL Fast testing set to provide a FAIL result from 0.01% B. A. C and up or set at the LEGAL Limit of 0.24Mg/l BrAC

WE RECOMMEND THAT YOU ADD A PACK OF 100 ALP-1 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING THIS PRODUCT