1. Design and implementation of (1000) cages for catching Myna birds upon request for two years AD
2. Angle Steel at least 2.5 mm thickness Size 25 X 25 mm Cage 1000 900
3. Rust-resistant galvanized iron mesh coated with a green PVC layer, 3 mm thick
4. Dyeing iron corners with rust-resistant dye
5. 2 entrances as shown in the sketch
6. Place an Iron Stand inside for the bird sit on as shown in the picture
7. Metal Numbering Plate with QR code type 1mm thickness stainless steel, As shown in the models, there is a ready-made sample with the project official
8. A stainless steel lock for each cage measuring no less than 38 mm, with a hanger for each key.
9. The doors opens from the left side as shown in the attachment models
10. Place a Zip lock on the door from inside the cage
11. Bird waterers (watering cans) with a capacity of not less than 3 liters per cage
12. The manufacturer is responsible for transporting and distributing the cages to and from the locations specified by the administration during the contract period.
13. Pay attention to the final finishes and remove all iron protrusions from the walls and sides, inside and out
14. It is possible to change the attached models of the cage in terms of the geometric shape during the validity of the contract period in terms of the way the cage is designed without increasing the maximum limit of measurements as shown in the models.
15. Preparing a sample of the cages required for acceptance and approval before starting manufacturing
16. Repair and delivery in stages The warranty is calculated for a period of two years after the delivery of each order of executed work (cage - locks - stripes - paintings - dyeing).