Heavy duty plastic watering can
14 litres
Oval shape of the body with wide top opening for
Filling water
Height of the body (mm):
270 - 300
Fitted with a removable watering rose
Calibration marks on the body at 1 litre intervals
Weight (g):
550-700
Fitted with an heavy duty handle from the top front
To the back of the body
Watering can made of high density polyethylene,
100% virgin
Material must be ultra-violet and heat resistant
The bucket should be clearly marked with: Manufactures name/trademark
They must be packed in strong cardboard boxes for shipment
Impact Test: With a very loosely packed bag of sand
Weighing 5 kg placed within the watering can, the can
Shall be held horizontally with the spout facing
Downward, and dropped four times from a height of
400 mm, measured from the tip of the spout. This
Test shall then be repeated with the can being
Dropped twice each onto the top and back handles,
With the 400 mm height being measured from the
Handles. Following these eight drops there shall be
Neither permanent set in excess of 25 mm measured
At the tip of the spout, nor any leaks when the can is
Filled with water.