A. Gathering Machine: Quantity: 2 sets
Specification:
1. Station
2. Book Length
3. Book width
4. Spine Thickness
5. Paper Thickness
6. Machine Speed
7. Stacker/delivery after gathering.
8. Error Detection with message: Double sheet, miss-sheet, Pile height detection, component/ section trip, chain overload, Safety guard open, emergency stop, collecting fault etc.
9. Power requirement
10. Compressor
11. Digital Counter
12. Control System
Between gathering and Covering. 13. Both inline and offline mode should available.
14. Lubrication: Automatic system
Automatic voltage stabilizer: 1 set (According to machine rating. )

B. Perfect Binder / Covering Quantity = 2 sets
1. Number of Clamps
2. Maximum Book Size
3. Minimum Book Size
4. Spine Thickness
5. Maximum Cover Size
6. Minimum Cover Size
7. Speed
8. Good cover feeding and nipping station.
9. Separate side gluing station with tank and gluing discs.
10. Continuous flow of clamps to the feed in station with "No book, No Cover" system.
11. Special type of milling cutter, which removes paper in "strips" and dust collection system.
12 Four line scoring/crissing.
13. PUR, perfect binding.
14. Cover pressing station.
15. Adhesive spine and side-gluing unit.
16. Glue vapor extraction.
17. Digital book counter.
18. Vertical stacker with jam detector.
19. Power Supply 20. Compressor: 21. Control System
: 3-phase 380-440V/50Hz
: 9CFM, 8bar (dry air)
: PLC with exact speed synchronization System between gathering and covering.
: 12 or above
: 370*250 mm or above: 140*110 mm or less
: 2 to 50 mm
: 400*640 mm or above: 140*220 mm or less
: 4000/hrs. Or above.
22. Both inline and offline mode should be available.
23. Error Detection with message: Pile height detection, component/section trip, chain overload, Safety guard open, emergency stop, cover missing, double cover, low temperature/high Temperature control system etc.
Automatic voltage stabilizer: 1 set (According to machine rating. )

Automatic Three Knife Trimmer Quantity = 2 sets
1. Book size (Minimum) 2. Book size (Maximum) 3. Maximum Pile Height 4. Speed
5. Compressor
6. Power Supply
7. Control System
8. Operation
9. Motor
10. Lubrication
11. Failure Massage on the emergency stop etc.
: 148*105 mm or less
: 380*310 mm or above
: 100 mm or above.
: 1600 cycle/hour or above.
: 8 CFM, 8 Bar/Dry Air type
: 380-440V, 3 Phase, 50 Hz
: PLC
: Touch Panel with all error Indications
: AC (VFD control)
: Automatic oil system
Display Board: Component/section trip, Safety guard,
Automatic voltage stabilizer - 1 set (According to machines rating).