Container, IP2 rated, full height ISO freight container
For transporting radioactive material
Internal loading rails and tied down system
IP2 compliance certficate in accordance with iaea SSR-6 (2018)
Color: Red oxide
Tare weight: 6 tons
Loaded weight: 25 tons
Length: 6000 mm width: 2400 mm
Height: 2400 mm
Tare weight: 6 tons loaded weight: 25 tons
Or
Container, IP2 rated, full height ISO freight container
For transporting radioactive material
Internal loading rails and tied down system
IP2 compliance certficate in accordance with iaea SSR-6 (2018)
External dimensions:
Length: 6058 mm
Width: 2438 mm
Height: 2591 mm
Internal dimensions (approx. ):
Length: 5879 mm
Width: 2328 mm
Height: 2332 mm
Roof top opening size (approx. ):
Length: 5707 mm
Width: 2226 mm
Door opening size (approx. ):
Width: 2338 mm
Height: 2266 mm
Max. Allowable gross weight: 30.48 ton
Tare weight (approx. ): 3.3 ton
Color: Red oxide (ral 3009)
# internal loading rails and tied down system
The 20FT transport container is equipped with 34 load supports to secure the car go. 11 fixed load supports at each bottom longitudinal beam and 6 fixed load supports at
Each top longitudinal beam.
The maximum load for the lower supports is 5tons and upper supports is 2 tons.
# IP2 compliance certficate in accordance with iaea SSR-6 (2018)
Security links for hooking in a net are provided in the doorframe and end beam regions
Container bottom steel plate, covered with 3mm stainless steel plate 1.4301.
The transport container roof is removable. It is equipped with outside expanding reamer fixing elements, each four of them installed at the long side and two at the small
Front-end side.
The locking device for the roof is stainless steel design.
The end beam over the door is of a swig out design (removable)
Produced in acc. With ISO 1496 part 1/ gross weight and classification in acc. With ISO 668 / corner fittings in acc. With ISO 1161
Material documentation in acc. With en 10204 - 3.2
Build in compliance with iaea SSR-6 (rev. 1 ), edition 2018, SSR-26, adr 2021 imdg code (actual version) - CFR 49 (173.465) regulations
Regulations and European pdsr guide issue 3 (dated December 2014). Design certificate IP-2
Acceptance certificate from the "rina"
The manufacturing is performed by a "rina" approved manufacturing control plan (qsp) operation instructions
---------------------------------
Manufacturer 2: Rina