A pressure converter is required: Type of execution - standard version, Type of measured pressure - excessive, Measurement limits - up to 25 MPa, Output signal - 4...20 mA + HART, Measurement error, no more than % - ± 0.50, Connection to the technological process - Valve block (2 valve block: Connection to the process - thread M20X1.5 (outer), material - steel, Explosion-proof shell/IIB, Not lower than IP65 (body material: Aluminum alloy), cable gland - One - thread M20X1.5 for DN20 metal sleeve (outer diameter of the crimped cable from 6 to 14 mm), Thermal cover (heating element: Heater; Junction box providing the possibility of connecting thermal covers with a loop), No more than 240X140X160 (+10), weight No more than 7.5 kg, Moderate and cold climate according to GOST 15150/ Non-seismic design.
A pressure converter is required:Type of execution-standard version, Type of measured pressure-excessive, Measurement limits-up to 25 MPa, Output signal-4...20 mA + HART, Measurement error, no more than % - ± 0.50, Connection to the technological process-Valve block (2 valve block: connection to the process - thread M20x1,5 (outer), material-steel, Explosion-proof shell/IIB, Not lower than IP65 (body material: aluminum alloy), cable gland -One - thread M20x1.5 for DN20 metal sleeve (outer diameter of the crimped cable from 6 to 14 mm), Thermal cover (heating element: heater; junction box providing the possibility of connecting thermal covers with a loop), No more than 240x140x160 (+10), weight No more than 7.5 kg, Moderate and cold climate according to
GOST 15150/ Non-seismic design