Single cat traps designed specifically for Trapping, Neutering and Release ensure the safe capture and temporary containment of cats and kittens with the following specifications:
1.
Lightweight and durable that will withstand multiple years of constant use.
2.
Traps should have a solid floor and should be non-collapsible.
3.
Transfer door panel. Should be equipped with back door slips up to aid the transfer the cat into a transfer basket.
4.
Self-activating trap designed to catch a single cat. To set et the trap, by outward opening front door above the trip bar. As the cat steps on the mesh treadle plate, the door is locked using a simple sliding ring mechanism to make catching the cat a gentle stress-free operation.
5.
It is built from 2.5cm X 2.5cm, 1.6mm wire mesh.
6.
Covered in powder coating to ensure long life.
7.
Coloured green or brown to help the trap to camouflage into the background.
8.
Trap should lightweight and durable.
9.
Dimensions and tolerances:
A.
Length 75cm +/- 30%
B.
Width 30cm +/- 30%
C.
Height 30cm +/- 20%
D.
Weight: 7kg +/- 20%
10.
A brochure of the cat traps showing compliance to the above specifications and a photo of the traps proposed with the offer shall also be attached with the offer.
11.
Suppliers who's cages do not conform to one or more of these specifications need not offer products. The client is very specific and will not tolerate variances.