I'm looking to produce a turbo kit for the Toyota 86/Subaru BRZ and scion FRS chassis. I've attached some rough photos. I'm chasing a custom baffled sump with -10an return feed fitting from the turbo and -8an sump bung with removable cover. I'm also looking for a bar and plate intercooler with a core dimension of 500X170X100mm and end tanks with low mounted inlets and outlets both being 2.5 inches in diameter. The exhaust manifold starts as a 4X 1.75 inch pipes and steps up to 2 inches at the first collector's. This is then increased from 2-2.5 inches at the 2ND collector before becoming a 2.5 inch V band fitting. The downpipe is 3 inches from top to bottom with 2X O2 bungs and a 3in flange at the bottom. I will supply the turbos from a local manufacturer as I like the brand name. The intercooler piping will need to be 2 inches out of the turbo and if I could get the silicone joiners in, that would be amazing. From the other side of the intercooler, it needs to be 2.5 inches until passing through the headlight where it will step up to a 3 inch pipe that goes into the throttle body. I'm happy to send samples and add any extra details you may require, more photos etc. I'm also open to increasing the MOQ if the unit price suits my budget. Let me know what you can work out!