**Technical Specifications: Bearing Temperature Control System (Dial Type BTD)**

**Application: **
This system is designed for use with TMEIC TM21 Series motors, custom-made by Scientific Controls.

---

**Supply and Delivery Requirements: **

- **Thermometer with Capillary**
- **Surface Mounting Flange**
- **2 X NO/NC Micro Switches** (for Alarm and Trip Contacts)
- **Refer to the provided diagram** for further details regarding the required dial.

---

**Part Numbers for Dial Type BTD: **
- DD 009662 P0006
- DD 009662 P0007
- DD 009662 P00010

---

**Dimensions and Details: **
The size of the dial is specified by the last number in the part number (P No. ). The dimensions of the dial, cable, and sensor are as follows (please refer to drawing No. 6112192):

P No. A (mm) B (mm) C (mm) ØD (mm) L (mm) Remark
|-------|--------|--------|--------|---------|--------|-------------------------|
6 100 150 Ø10 2000 50 Rubber Pad 8mm Thick
7 35 85 Ø10 2000 50 with Bend Back Plate
10 35 100 Ø10 1500 65

---

**Notes: **
1. All thermometers must comply with the technical specifications outlined.
2. Please refer to the drawing (6112192) for further details on dimensions and design.
3. Suppliers must confirm that their products meet the specifications.
4. Any deviations from the specified dimensions or features must be approved by the Maintenance Section before delivery.

---

**Part Numbers and Quantities: **

Part Number Quantity
|---------------------|----------|
DD 009662 P0006 5
DD 009662 P0007 5
DD 009662 P00010 2