1. Sodium Bentonite (OCMA grade, Treated Bentonite suitable for hard water) Composition: As per API specification 13A having following
Specifications: -
I. Should Yield 90 to 100 barrels of 15cps mud per ton of bentonite.
II. Viscometer dial reading at 600rpm: Minnimum 30
III. Marsh funnel Viscosity: 50 sec/1000cc of 6% high gel.
IV. 6.5% Mud age: 24Hrs
V. Sand Contents: Less than 2%
VI. Yield Point/Plastic viscosity ratio: 6 (Maximum)
VII. Residue of diameter greater than 75 micrometers: Maximum mass fraction 2.5% by weight.
VIII. Moisture: Less than 13% by weight.
IX. pH: 9-10
X. Packing: 50Kg/Bag

2. Sodium Bentonite (High Gel Optimum)
Specification
I. Composition: According to API Standard
II. Viscosity: 15 CPS (Minimum)
III. Marsh Funnel Viscosity: 50sec/1000CC of 6% Bentonite mud aged 24 hours.
IV. Sand contents: Should not exceed 1%
V. Filtration Loss: 15-18 ml/30min, under 100 PSI
VI. Yield: About 90-100 barrels of mud of 15 CPS visous mud.
VII. pH: 9-10
VIII. Gel Strength: About 30/10 lbs/10min. Per 100 FT2
IX. Packing: 50 Kg Polypropylene Bags

3. Sharqi Shale Stabilizer