We have a customer that will need to buy 04 Extractors/Dust Collectors, please cheque if with the bellow provided information you can be able to propose a unit quote.

INFORMATION, GAS AND POWDER EXTRACTION SYSTEMS

Important we require an extractor system and gas and dust collector with the characteristics of the gases and dusts mentioned below. Replacement filters must be included. Already the ducts or pipes as well as bells connecting the equipment are ordered in manufacture.



1. Work area or cab dimensions you need. Cabs are not required, already the bells that connect the equipment with the pipes or ducts are already purchased already the workstations or work tables.
2. Equipment to be in the cabs. The equipment to be connected are: LPG oven melting samples at temperatures of 1300 C, Oven or Mufla cooperation at temperatures of 1000 C, roasting oven at temperatures of 800 C, Maria bath at temperature of 100 C and homogenizer at room temperature.
3. What temperatures will be generated during the tests they carry out. The equipment to be connected are: LPG oven melting samples at temperatures of 1300 C, Oven or Mufla cooperation at temperatures of 1000 C, roasting oven at temperatures of 800 C, Maria bath at temperature of 100 C and homogenizer at room temperature.
4. What characteristics and volume the powders are generated. The powders that are generated are from Brax, LITARGIRIO, Sodium Carbonate, mineral samples where gold and silica sand are found. The volumes to be handled are dependent on the samples to be processed but we are talking about a production plan of about 5000 samples per year equals volumes greater than the ton of all these products
5. How do you want to collect the powders? In filters on the outside where the large collector system is connected. These filters should be possible to clean and replace them when needed so you should offer replacement filters
6. Chemicals and volume are handled inside the cab. The chemicals are handled are Brax, LITARGIRIO, Sodium Carbonate, mineral samples where gold and silica sand are found. The volumes to be handled are dependent on the samples to be processed but we are talking about a production plan of about 5000 samples per year equals volumes greater than the ton of all these products.
7. What pipe lengths for the extraction system do you need (e. G. 10 meters / 100 meters)? . Pipes or ducts are already contracted in the manufacturing phase for assembly by the manufacturer.
8. Working voltage. 220 V at 60 Hz.
9. Thegases circulating through the pipes to the collecting system and collector of gases and dusts are: CO2 as a result of the combustion of liquefied gas, Pb gases as a result of the use of PbO.
10. Additional required...4 separate large acid-resistant system extractors.
11. Flow rate: About 300 m3/h.

Regards.