REQUIRED QUANTITY: 25 pieces
TECHNICAL DESCRIPTION:
Crucible f710*1450 mm made of EG graphite fig. 1.3107.00.000
Crucible fig. 1.3107.00.000 made of EG graphite
Should have the following characteristics:
- density, not less than 1.55 g/cm3;
- tensile strength in bending, not less than 5.9 MPa;
- ash content, not more than 0.5%;
- specific electrical resistance, ER, not more than 12.5 Ohm*m.
The following are not allowed on the product:
- cracks
- cavities with a maximum size in any direction greater than 15 mm and a depth greater than 10 mm;
- chips greater than 10 mm in depth and greater than 25 mm in length;
- grain chipping greater than 5 mm in depth.
The certificate must indicate the characteristics in accordance with the test results:
- density by measurement according to GOST 23775 (drawing 3) and weighing
- bending strength according to GOST 23775
- ash content according to GOST 22692
- specific electrical resistance according to GOST 23776, section 1
Physical and mechanical properties of the material according to Table 4 for grade EG-RR GOST R 57613-2017
The product must be NEW, manufactured in 2024-2025.
If your company works directly with companies registered in the Republic of Kazakhstan, please provide the price in rubles minus 20% VAT.