Onion Grading Machine
Technical Specifications: General
Brand new: Onion industry
Suitable for segregation and classification
Material: Food industry grade stainless steel and ISO certified
Technical Specifications
Design type: Rotating drum with rods and protective gauze coverage.
Approximate drum dimensions: Internal length: 10 feet minimum processing part (approximately) Internal diameter: 2 feet minimum
Internal drum gauge thickness: Min 4 mm: Shaft is the part that the divergent cylinder rotates on, and it supports the weight of both the cylinder and the product.
Size tolerance: Minimum 3 sizes and types it varies Small: Less than 40 mm Medium: 40 - 70 mm Large: 70 - 100 mm With outlet chute cushioning for safety of onions
Motor: With gear min 3 HP AC 230 V / 50 Hz / 1-phase
Foot: Ball foot adjustable preferably field tiers
Divergent cylinder (Closed); Divergent cylinder should be closed at the end so any product would not exit from end part and similarly close the whole cylinder from the upper side to avoid any hazard.
Processing Capacity: 200 Kgs per hr (at least)
Variable speed adjustable
Acid resistant: Yes (Cleaning solution)
Hot water resistant: Yes till 100 degrees Celsius
Alkali resistance: Yes, Cleaning solutions
Emergency stop: Yes (Including personal protection for moving parts) near to feeding hopper. Cover the e-motor and chain to protect them from weather exposure and enhance safety. Ensure the machine is adequately earthed to avoid electrical hazards.
Smooth finish (Internal): Yes. Mandatory
Temperature resistant: -50 - +6O-degree storage Celsius
Spare parts: Bearing, joints, and other spares
Optimize the roller speed and slope. Embed or display a conversion chart for speed to RPM vs Frequency on the machine for ease of use.
After sales service:
Remote assistance the supplier can provide remote technical assistance via qualified and dedicated technician if and when required. The responsible person must be a qualified technician belonging to manufacturer' s staff.
Instruction manual: In local language or in English
Pre-delivery inspection will be done by an inspection company/FAQ PAK.
Training
The supplier must undertake Demonstration on the operation and maintenance of the items, before handing it over to the end users.
Training needs: - Description: Demonstration of the grader on how to operate, and maintain the machine before handing over to the end users.
Warranty:
A full and clear manufacturer's warranty statement transferable with the ownership of the equipment (FAQ or end-user) must be submitted with your bid detailing the terms and conditions that are being offered.
The minimum requirement is for a twelve (12) months warranty period.
Spare Parts:
A list of manufacturers recommended, fast moving spare parts should be provided by supplier. The list must be itemised, costed and submitted with your bid,
Manufacturers must have a certified (ISO 9001-2000) or other accepted international and national standards on Quality Management System and Production Facility. No unlicensed manufacturers will be considered.