We request a quotation for the following items. Please ensure all the details are provided as specified below.

1. P-101C/D Dewaxing Feed Pump
Quantity: 2 Units (1 operating, 1 standby)
Pump Type: Centrifugal, Horizontal
Service: MEK Charge Pump for Dewaxing New Feed Train
Operating Conditions:
Liquid: Raffinate
Inlet Pressure: 0.78 kg/cm²a
Outlet Pressure: 16.2 kg/cm²a
Flow Rate: Rated: 10 m³/h, Normal: 7 m³/h, Minimum: 3 m³/h
Differential Pressure: 15.4 kg/cm²
Operating Temperature: 75°C
Specific Gravity: 0.865
Head Rated: 181.9 m
Pump Speed: 2900 RPM
Material Specifications: API 610, 11th Edition, including wear rings, impeller, shaft seals, and casing.
Electrical Motor: EX de II BT4, IP: 55, 400V/3PHASE/50Hz, IE2, Duty S1
Motor Origin: Western Europe (brands like Sever, VEM, Siemens, ABB, etc. )
NPSHA: 5.1 m
Cooling System: Soft water at 38°C and 4.0 kg/cm²g

2. P-155A/B Warm Wash Pumps
Quantity: 2 Units (1 operating, 1 standby)
Pump Type: Centrifugal, Horizontal
Service: Warm Wash (MEK + TOL + Oil)
Operating Conditions:
Inlet Pressure: 0.91 kg/cm²a
Flow Rate: Rated: 20 m³/h, Normal: 17 m³/h
Operating Temperature: 60-70°C
Specific Gravity: 0.790
Head Rated: 12 m
Pump Speed: 2900 RPM
Differential Pressure: Not specified, but to be as per API 610 standards.
Material Specifications: API 610, 11th Edition, including impeller, shaft seals, and casing.
Electrical Motor: EX de II BT4, IP: 55, 400V/3PHASE/50Hz, IE2, Duty S1
Motor Origin: Western Europe (brands like Sever, VEM, Siemens, ABB, etc. )

3. P-156A/B Off-Spec Foots-Oil Pumps
Quantity: 2 Units (1 operating, 1 standby)
Pump Type: Centrifugal, Horizontal
Service: Off-Spec Foots Oil
Operating Conditions:
Inlet Pressure: 0.91 kg/cm²a
Flow Rate: Rated: 20 m³/h, Normal: 15 m³/h
Operating Temperature: 50-90°C
Specific Gravity: 0.876-0.856
Head Rated: 45 m
Pump Speed: 2900 RPM
NPSHA: 5.7 m
Material Specifications: API 610, 11th Edition, including wear rings, impeller, shaft seals, and casing.
Electrical Motor: EX de II BT4, IP: 55, 400V/3PHASE/50Hz, IE2, Duty S1
Motor Origin: Western Europe (brands like Sever, VEM, Siemens, ABB, etc. )

4. P-103C/D Wet Solvent Pumps
Quantity: 2 Units (1 operating, 1 standby)
Pump Type: Centrifugal, Horizontal
Service: Wet Solvent (MEK + Toluene + Water + Wax)
Operating Conditions:
Inlet Pressure: 0.91 kg/cm²a
Flow Rate: Rated: 72 m³/h, Normal: 51 m³/h
Operating Temperature: 50°C
Specific Gravity: 0.799
Head Rated: 105 m
Pump Speed: 2900 RPM
NPSHA: 5.75 m
Material Specifications: API 610, 11th Edition, including wear rings, impeller, shaft seals, and casing.
Electrical Motor: EX de II BT4, IP: 55, 400V/3PHASE/50Hz, IE2, Duty S1
Motor Origin: Western Europe (brands like Sever, VEM, Siemens, ABB, etc. )

5. Electro Pumps for De-Oiling Project
Quantity: 8 Units
Service: Electro Pumps for De-Oiling Application
Manufacturer Origin: European
Specifications:
Must meet API 610 standards
Must include mechanical seals as per API 682
Technical Requirements:
Seal Plan: Vendor to propose and endorse API seal plans.
Cooling System: Specify water cooling for bearings if applicable, with piping and nozzle sizes.
Material Construction: All components must comply with API 610 standards, with ISO 1940-1 GR. 2.5 balancing for impellers and rotating components.
Surface Preparation and Painting: Vendor to advise.
Documentation: Vendor to provide:
Detailed drawings, part lists, and diagrams.
Instruction and maintenance manuals.
Complete performance test results (hydraulic, hydrostatic, NPSHR inspection).
Spare part lists for commissioning and 2 years of operation.