Dear Ladies and Gentlemen

For first I want to build a prototype and need a quotation for the following items:

1 piece. Chipsets fuse as with the TC steamer safety against short circuit. It will be evaporated normal liquid. The target temperature should be between 100 - 300 degrees Celsius at 40 - 50 W. I will connect the chip board later to a 510 connector. I need a 2ND output. That's why I need on the chipset another one 6 cm long isolated wire to extend later.
The whole thing should be controlled via an external "fire button". An encoded receiver based on the radio frequency is needed.

1 piece. "Fire button" (button) operate by button battery including sender to the control chip. More units in radio range must be activated without them interfering with each other. The transmission range is 2 meters. The radio band has to be easy to release, not a specific one.

1 piece. Chipset for battery monitoring under load with micro USB port. The charging current should be between 30 A - 35 A for a standard 18650 battery 2600mAh. So a standard battery charging ICs with micro USB port.

Thank you in advance. I am available for any questions.

With kind regards

Trevor Sannwald