Can you provide the following:
Micro burning torch / jet lighter with a piezoelectric ignition (push button to turn on)
Size to be approximately 90mm long X 20mm wide
Materials not important as long as they are fit for purpose in a burning torch (e. G. Molded plastic or metal is fine as long as they are fit for purpose).
Design must be as similar as possible to the attached artwork. The better match to the artwork, the better the chances of being awarded the work. A chrome-shiny type finish is better than a silver paint. If a manufacturer can provide this shiny finish they will be given priority.
The flame is to be blue burning and pinpoint, not flaring or red/yellow
The product should have a port on the back end (opposite to flame end) for refilling butane / gas.
The manufacturer has permission to take an existing micro torch and mold / build this design around the existing torch. However, functionality of the torch must remain intact. Dimensions can change, but I must know the new proposed dimensions.
A 10000 unit initial order is likely (upon receiving a favourable sample), with more to follow.
I can provide design files upon request.
Looking forward to receiving your proposals.
Thank you and regards