We are looking for a supplier for a bathroom concept. Please Do not apply if you can't support all that is required.

As you can see in the provided drawings we are looking for a bathroom with a surface face of 175 X 80cm mounted against a 5-8cm thick wall and approx. 200cm high. The system should only have one drainage (50mm), one water supply and on electrical connection.

The drainage of sink and shower will be connected to the toilet. The toilet will need to have a macerator (blender for human waste) that pumps the wast through a 50mm drainage.

Regarding the shower enclosure, it needs to be a stand alone unit and mounted against the mentioned back wall. The hot water should be provided by an electrical flow heater as shown in the picture.

The sink will receive also the hot water through the same flow heater as the shower and should only measure about 20X10cm with a mixing tab.

The flow heater as well as macerator and lamp above the sink should run on one circuit if possible. An optional power outlet should be provided next to the lamp.

A mirror as well as a toilet paper holder should be fixed either to the wall, shower, etc...

Also a small cupboard with a towel holder should be fitted under the sink. The cupboard should have about 3 shelfs.

All appliances and fixtures need to be TüV verified and certified for the German market.

In addition everything should have a guarantee of min 3 years and be energy efficient.

Again, please submit inly if everything mentioned can be supplied.