Please quote a complete CNC panel, plus servo drivers. We have the servo motors, they are Fanuc yellow cap. If they are not compatible, please also quote the servo motors. We want to upgrade a machine that is a bit old, the technical details of the servo plates are erased, this is what I managed to find on the internet.

Complete technical data sheet of the Kitamura Mycenter 1B machine (1992), serial number 01780:

General information:

Model: Kitamura Mycenter 1B
Year of manufacture: 1992
Serial number: 01780
CNC control system: Fanuc 0I-MD
Machine type: Vertical machining center
Table capacity: 1250 X 630 mm
Travels:
X axis: 1000 mm
Y axis: 630 mm
Z axis: 500 mm
Speeds:
Maximum travel: 30 m/min
Maximum spindle:
According to manual: 4000 rpm
According to plate: 5500 rpm
Spindle motor power:
According to manual: 15 kW
According to plate: 5.5 kW
Tool changer: Automatic, 24 tools
Servo drivers:

X axis: 0.8 kW DC servo driver, Fanuc A06B-0622-B005
Y axis: 0.8 kW DC servo driver, Fanuc A06B-0622-B005
Z axis: 1.1 kW DC servo driver, Fanuc A06B-0651-B005
Servo motors:

X axis: 0.8 kW DC servo motor, Fanuc A06B-0364-B005
Y axis: 0.8 kW DC servo motor, Fanuc A06B-0364-B005
Z axis: 1.1 kW DC servo motor, Fanuc A06B-0405-B005
Power supply:

Servo drivers: 200V AC three-phase or 400V AC three-phase (depending on configuration)
Servo motors: 24V DC
Additional information:

The 1992 user manual does not include information on the movement of the cutting tool.
The machine may have been upgraded with different components than those indicated in the manual or the plate.
There are discrepancies between the information on the plate, the manual, and other sources.
Elements of the plate photo:

Model: Kitamura Mycenter 1B
Serial number: 01780
Year of manufacture: 1991
Supply voltage: 200V AC three-phase or 400V AC three-phase (depending on configuration)
Supply frequency: 50/60 Hz
Rated current: 23 A
Rated power: 15 kW
Power factor: 0.85
CNC control manufacturer: Fanuc
CNC control model: Fanuc 0I-MD
X axis: 1000 mm
Y axis: 630 mm
Z axis: 500 mm
Maximum travel speed: 30 m/min
Maximum spindle speed: 4000 rpm (according to manual) / 5500 rpm (according to plate)
Spindle motor power: 5.5 kW (according to plate)
Tool changer: Automatic, 24 tools
Type of servo motors: Fanuc
Type of servo amplifiers: Fanuc
Safety standards: CE
Power consumption:

Tool changer: 40 W in AC
Water: 180 W in AC
Oil lubrication: 5 W in AC
X-axis servo driver:

Model: Fanuc A06B-0622-B005
Type: DC servo driver