This sourcing request has expired, please quote as soon as possible next time.
Needing Milling and Lathe Work Done
Date Posted:2023-04-04 14:36From English Site
Valid to:2023-06-20
Purchase Quantity:
50 Piece(s)
Trade Terms:FOB
Payment Terms:T/T
Sourcing Request From:Request From: Australia
Shipping Method:Express
Quote Now
Quote Left:
0
Product DescriptionBuyer Business Info.
It's a upgraded modified part of a fully custom competition gel blaster...
It is a 12mm in diameter stainless steel or brass piece of tube that is a total of 110mm or 11cms in length. It only has a hold down the center of the peice that is 8mm with the opening of the hold to have a thread Tap M10 1.5 for the first 11mm and then a 8mm hole to be drilled out center of the peace that starts at the tread end inside and drilled to 70mm or 7cms deep from the thread ending inside the piece...
I also would like a 6mm slot cut in my piece that starts at the internernal thread ending (11mm) it is to be perfectly straight and runs down the piece for 5cms with a 1cm Right facing slot I have a drawing I have done up to give a fair idea of the
Attached Files
Please sign in to download the attachments if you are Premium Member.
Please sign in to view buyer business information if you are Premium Member.
Quotation Record
6 supplier(s) have provided quotations. Only 0 quoting chance(s) left!